Saturday, August 11, 2012

How to make Napkin Rings with our Images

Hi :)

This is a tutorial on how to assemble napkin rings with our images from our Shop "2 Cute Party Prints"


Supplies:
♥ Napkin Ring Images from 2 Cute Party Prints :)
♥ 8 1/2 x 11 white paper of your choice.  We like to use 110lb white card-stock.
♥ Scissors or Paper Cutter
♥ Tape
♥ Napkins


First you will need to print your images and cut them out with either scissors or paper cutter.



Then all you will do is roll your napkin up and put your napkin ring around it and tape it on the back.  You may need to trim the napkin ring down a little before you tape it.


We hope you enjoyed this tutorial.

Please click HERE to go to our Shop

Please click HERE to go to more of our tutorials.

Thanks!


How to assemble Party Signs and Table Signs with our images

Hi :)

This is a tutorial on how we like to make our Party Signs, High Chair Signs and Table Signs ready to hang up :)

You can get the images for these types of signs at our Shop "2 Cute Party Prints"  we can make them to match any invite image in our shop :)


Supplies for Party Sign / Welcome Sign:
♥ Party Sign Image from 2 Cute Party Prints :)
♥ Printer or you can print them at most office supply stores
♥ Scissors or Paper Cutter
♥ Ribbon
♥ Single Hole Punch

Supplies for Table Signs or High Chair Sign:

♥ Table Sign Images from 2 Cute Party Prints :)
♥ Printer or you can print them at most office supply stores
♥ Scissors or Paper Cutter
♥ Tape


To start you will need to print your images.



After you print them there will be a white border around the image, you can use a paper cutter to cut this off or you can use your scissors.  If you are making the Table Signs or High Chair Signs you can stop after you trim the edges off and we like to just tape them to the front of the tables or the front of the high chair. 

If you are making the Party Sign / Welcome Sign you will want to continue the tutorial.....





Then for the Party Sign / Welcome Sign I like to punch two holes in the top and put ribbon through them to hang it up with.  I like to double knot the ribbon so it will hold together better.



Now your party signs are all ready to hang up :)

Hope you enjoyed this tutorial.

Please click HERE to go to our Shop.

Please click HERE to go to more of our tutorials.

Thanks!

FREE confetti :)

Hi :)

This is kind of a tutorial, I guess....  This is something that i do, that I thought I would share....

Supplies:
♥ Any papers you have left over from cutting out your images from your party packs that you get at our shop 2 Cute Party Prints - save all the papers that have any color on them.
♥ Hole Punch


Now you just take your papers and start punching holes in them...  Voila you have FREE confetti.  I LOVE to save money and this is a GREAT way to do that.  You will get confetti with the colors from your decorations and for FREE.  Sometimes I will print a few extra sheets of stuff if I do not have many scraps let over and I just punch those with my hole punch.  But still a super cheap project to do :)





I hope you enjoyed this little money saving tip :)

Thanks for stopping by :)

Please click HERE to shop.

Please click HERE to go to more of our tutorials.

How to assemble toothpick flags

Hi :)

This is a tutorial to show how to assemble toothpick flags with our images from our Shop "2 Cute Party Prints"


Supplies:
♥ Toothpick Flag images from 2 Cute Party Prints :)
♥ Printer or you can get them printed at most office supply stores
♥ 8 1/2 x 11 white paper of your choice - we recommend 110lb white card stock
♥ double sided tape
♥ Paper Cutter or Scissors
♥ toothpicks
♥ Something to score the paper with - Please click HERE to see Tips from Martha Stewart's Site :)


To start you will need to print your images.


Then you can cut them out with a paper cutter or scissors.


Then you will need to score them down the center where the red line is in the photo below.



Now you will place a piece of double sided tape down the middle.  And place the tooth pick in the center.  I like to place the toothpick a little bit down from the top of the paper.


Then you just fold it over and press it down really good to make sure it will stay together.  And now you have your toothpick flag.  These are GREAT to get for any party - on our website we make them with the colors from your invite image and you can write anything on them.  They are great to use to let people know the different foods you are serving.  



I hope you liked this tutorial.

To shop please click HERE.

Please click HERE to go to more of our tutorials.

Thanks!

How to assemble Cupcake Wrappers with our images

Hi :)

This is a tutorial for how to assemble the cupcake wrappers with our images from our Shop "2 Cute Party Prints"

Supplies:
♥ Cupcake Wrapper Images from 2 Cute Party Prints :)
♥ Printer or you can print them at most office supply stores
♥ 110lb white card-stock
♥ double sided tape
♥ regular scotch tape
♥ scissors


To start you will need to print your images out.  We recommend to print them on 110lb white card-stock.


Then using your scissor you just cut it out.



Then you will need to put a piece of double sided tape on one end and roll the two ends together and press them together.  After I do that I like to put a regular piece of scotch tape on the inside to help it stay together better.


And now you have your cupcake wrapper ready to put your cupcakes in :)


I hope you enjoyed this tutorial.

Please click HERE to shop.

Please click HERE to go to more of our tutorials.

Thanks!